Cover for well No. 2

If the skin will be fastened with screws, it is worth using self-tapping screws with zinc coating. Zinc will prevent the appearance of rust and ugly rusty streaks on the roof.



And in order for its operation to be more comfortable, we advise you to equip a neat single-leaf door, placing it on the front ramp.



The canvas can be made from the same lining that was used for sheathing, having built something in the form of a small shield.



The finished door is hung on simple one-piece door hinges. To maintain the flatness of the ramp, it is necessary to fix a narrow rail from the inside of the skin, securely connecting it with the details of the skin. This is necessary so that the door does not sink in.



Take care to protect the wood from moisture, which is in excess in the well and in the external environment, during the rainy season or off-season, when the snow melts and turns into water. Covering the inner and outer surfaces with a protective compound will save you from worries about this. It's up to you to decide what kind of composition it will be.



Now various protective products are offered both at a price and in terms of quality characteristics. Although, the simplest means will justify all the hopes placed on him as a defender of the lid.



Production of a metal cover for a well



In addition to wells designed to provide water necessary for people, plants and animals, there are sewers everywhere in the house plots today. They are located almost level with the ground level, and this is what makes us take care of how to protect people and domestic animals from falling to the depth.



Sewer tanks must be closed very securely. Usually the covers are made of heavy and massive steel. Its production begins with the fact that a steel frame structure is created using a steel corner or using a rectangular profile.



The details are most convenient to cut with a grinder or a special locksmith hacksaw. Electric welding is required to connect the frame in the corners. To make the product more qualitative, it is recommended to make a chamfer along the edge of the parts in the places of welding. Then the seam will practically not be visible.



To make the steel lid more convenient to use, weld a steel ring made of a bent plate 50-60 mm wide inside the frame.



And in order to reliably protect the lid from displacement, the corners of the base need to be welded to pipe scraps or metal rods previously driven into the ground.



To fill the inner space between the ring and the frame, tightly packed soil or concrete mix is suitable.Another option for protection against penetration into the tank is a steel door fixed on a frame frame and closed for greater reliability on a hinged (mortise) lock.



In principle, as a last resort, you can close the bell of a well or a drain pit with a simple wooden shield. But in this case there is no guarantee that it will reliably cope with its main purpose. The casino actively promotes responsible gaming and there are several restrictions that users can set on their profile. They can set deposit limits in https://tropicalwinscasino.co.uk on various basis - daily, weekly or monthly, and once they reach the limit, further deposits will be blocked until the limits are reset.